PS2 Coder Video Tutorial

[ESS ESS BEE BEE]

Here is a video tutorial of ps2 and coder. It's a pretty basic tutorial.



1) Launch Coder by putting disc into PS2 and loading it.

2) Enter Cheat Menu selection once Coder reaches main screen.

3) You will see a list of video games. Press [SQUARE[ and choose add a description. Call it whatever you want i called it MGO1

4) Once you create the game description you have to make 5 description. 1) Master 2) DNAS 3) HTTPS 4) BYPASS 5) CRYPTO

5) You will enter sets of codes for each description. You can find these codes here

6) Once each sets of codes and properly inputted in each five description. SAVE codes. Then press [SQUARE] to BOOT DISC

7) A small box will appear which reads 1) NORMAL 2) SPECIAL 3)CHEAT MENU. <-- At this part you will remove the coder disc and replace it
with your MGS3 disc.

8) Choose choice 1) NORMAL. then default and game will boot.

9) Please don't forget to manually input your IP address and DNS <- You do this by Going to Detailed Settings. and go to Edit Network Settings.

10) Once that's done you are good to go!

[Solid.Snake.]

I followed all the instructions for the coder disc I manually input my IP and DNAS. when I test the connection it gives me error code( -612):
I used the DNS codes on the main page of the website and I found my IP gateway address and subnet mask on my router what can I do to fix this or is this fine maybe set up a static IP I'm not quite sure if that will do anything or not but this is my last step and then all I need to do is read the sensors on my slim ps2 so that I can open the disc tray and insert Mgo

[Solid.Snake.]

okay so I got the disk swaped now I'm getting a
UDP PORT CHECK FAILED. (518:1024)